How to Clean and Seal Your Paver Patio to Withstand the Long Island Coast

Your paver patio is a huge investment in your home's enjoyment and value. To protect it from the harsh coastal elements—salt air, strong sun, and heavy rain—regular cleaning and sealing are essential.

Follow this simple guide from JC Masonry & Concrete to keep your patio looking brand new.

Step 1: The Deep Clean

- Remove Debris: Sweep the entire surface thoroughly.
- Apply Cleaner: Use a dedicated paver cleaner (not bleach or acid). For mildew or algae, choose a cleaner with a mildewcide.
- Scrub & Rinse: Use a push broom and a garden hose or a pressure washer on a low setting to avoid washing out the joint sand.

Step 2: Re-sand the Joints (if needed)
If the polymeric sand has eroded, it's crucial to refill the joints. This locks the pavers in place and prevents weeds.

- Ensure the patio is completely dry.
- Spread sand over the pavers and sweep it into the joints.
- Use a plate compactor to vibrate the sand down.
- Lightly mist the patio with water to activate the sand's hardening agents.

Step 3: Apply a Quality Sealer

- Wait: Ensure the patio and joints are 100% dry (at least 24-48 hours after rain or cleaning).
- Choose a Sealer: We recommend a penetrating, breathable sealer that enhances color and provides protection without a high-gloss "wet look."
- Apply: Use a sprayer and back-brush for an even coat. Follow the manufacturer's instructions carefully.

Keep your patio beautiful with minimal effort. For a professional-grade clean and seal that lasts, contact JC Masonry & Concrete!

https://www.jcmasonryconcretedesign.com/how-to-clean-and-seal-your-paver-patio-to-withstand-the-long-island-coast/